P130, PL130 Polishing Cleaning Ball for Special Water Conditions
Description
P130, PL130 Standard sponge cleaning balls with an added polishing agent, specially designed for stainless steel and titanium tubes in low-salinity water systems.
This type is suitable for maintaining high cleanliness in heat exchanger tubes while protecting the tube surface during continuous operation.
Application
Suitable for:
- Stainless steel tubes in low-salinity water systems
- Titanium tubes in low-salinity water systems
- Heat exchangers requiring gentle polishing and cleaning performance
Cleaning Frequency
P130, PL130 Recommended cleaning frequency:
12 cleaning balls passing through each tube per hour.
Features
- External polishing agent coated cleaning balls for enhanced cleaning and surface conditioning.
- Suitable for clean or lightly fouled stainless steel and titanium tubes.
- PL130 type can be used for clean stainless steel and titanium tubes.
Product Physical Properties
| Model | Hardness | Wet Density | Characteristics |
| P130 | Soft (25° Shore C) | 1.04–1.08 g/cm³ | Standard base type |
| P150 | Medium (28° Shore C) | 1.04–1.08 g/cm³ | Improved durability |
| P160 | Hard (32° Shore C) | 1.04–1.08 g/cm³ | High wear resistance |
- Aging Coefficient:≥0.70
Product Highlights – Standard P Series
- General-purpose standard cleaning ball widely used in power plants.
- Balanced elasticity and stable cleaning performance.
- High cost-performance ratio.
- Standard configuration for neutral water quality systems.
Recommended Applications
- Conventional thermal power plants
- Captive power plants
- Routine maintenance of new units
- Soft sludge and bio-fouling conditions
Product Highlights – Upgraded Wear-Resistant P Series
Physical Properties
Based on standard P series with improved cross-linking structure:
- Higher cross-linking density formulation
- Wear loss ≤ 12 mm after 120 hours operation
- Aging coefficient ≥ 75
Advantages
- Upgraded wear-resistant formulation
- Reduces cleaning ball consumption by approximately 30%
- Extends service life and reduces replacement frequency
Recommended Applications
- High flow-rate systems
- 24-hour continuous operation combined heat and power (CHP) units
- Industrial cooling systems requiring reduced maintenance frequency
| Product Name | PART NUMBER | PRODUCT TYPE | Diameter (MM） | SYSTEM TYPE | HARDNESS | COLOR |
|---|---|---|---|---|---|---|
| 14-PL130-3 || 14mm Cleaning ball | 14-PL130-3 | Polishing Ball for Special Water Conditions | 14 | PL130 | 3 | Customized |
| 15-PL130-3 || 15mm Cleaning ball | 15-PL130-3 | Polishing Ball for Special Water Conditions | 15 | PL130 | 3 | Customized |
| 16-PL130-3 || 16mm Cleaning ball | 16-PL130-3 | Polishing Ball for Special Water Conditions | 16 | PL130 | 3 | Customized |
| 17-PL130-3 || 17mm Cleaning ball | 17-PL130-3 | Polishing Ball for Special Water Conditions | 17 | PL130 | 3 | Customized |
| 18-PL130-3 || 18mm Cleaning ball | 18-PL130-3 | Polishing Ball for Special Water Conditions | 18 | PL130 | 3 | Customized |
| 19-PL130-3 || 19mm Cleaning ball | 19-PL130-3 | Polishing Ball for Special Water Conditions | 19 | PL130 | 3 | Customized |
| 20-PL130-3 || 20mm Cleaning ball | 20-PL130-3 | Polishing Ball for Special Water Conditions | 20 | PL130 | 3 | Customized |
| 21-PL130-3 || 21mm Cleaning ball | 21-PL130-3 | Polishing Ball for Special Water Conditions | 21 | PL130 | 3 | Customized |
| 22-PL130-3 || 22mm Cleaning ball | 22-PL130-3 | Polishing Ball for Special Water Conditions | 22 | PL130 | 3 | Customized |
| 23-PL130-3 || 23mm Cleaning ball | 23-PL130-3 | Polishing Ball for Special Water Conditions | 23 | PL130 | 3 | Customized |
| 24-PL130-3 || 24mm Cleaning ball | 24-PL130-3 | Polishing Ball for Special Water Conditions | 24 | PL130 | 3 | Customized |
| 25-PL130-3 || 25mm Cleaning ball | 25-PL130-3 | Polishing Ball for Special Water Conditions | 25 | PL130 | 3 | Customized |