P130, PL130 Polishing Cleaning Ball for Special Water Conditions
Description
P130, PL130 Standard sponge cleaning balls with an added polishing agent, specially designed for stainless steel and titanium tubes in low-salinity water systems.
This type is suitable for maintaining high cleanliness in heat exchanger tubes while protecting the tube surface during continuous operation.
Application
Suitable for:
- Stainless steel tubes in low-salinity water systems
- Titanium tubes in low-salinity water systems
- Heat exchangers requiring gentle polishing and cleaning performance
Cleaning Frequency
P130, PL130 Recommended cleaning frequency:
12 cleaning balls passing through each tube per hour.
Features
- External polishing agent coated cleaning balls for enhanced cleaning and surface conditioning.
- Suitable for clean or lightly fouled stainless steel and titanium tubes.
- PL130 type can be used for clean stainless steel and titanium tubes.
Product Physical Properties
| Model | Hardness | Wet Density | Characteristics |
| P130 | Soft (25° Shore C) | 1.04–1.08 g/cm³ | Standard base type |
| P150 | Medium (28° Shore C) | 1.04–1.08 g/cm³ | Improved durability |
| P160 | Hard (32° Shore C) | 1.04–1.08 g/cm³ | High wear resistance |
- Aging Coefficient:≥0.70
Product Highlights – Standard P Series
- General-purpose standard cleaning ball widely used in power plants.
- Balanced elasticity and stable cleaning performance.
- High cost-performance ratio.
- Standard configuration for neutral water quality systems.
Recommended Applications
- Conventional thermal power plants
- Captive power plants
- Routine maintenance of new units
- Soft sludge and bio-fouling conditions
Product Highlights – Upgraded Wear-Resistant P Series
Physical Properties
Based on standard P series with improved cross-linking structure:
- Higher cross-linking density formulation
- Wear loss ≤ 12 mm after 120 hours operation
- Aging coefficient ≥ 75
Advantages
- Upgraded wear-resistant formulation
- Reduces cleaning ball consumption by approximately 30%
- Extends service life and reduces replacement frequency
Recommended Applications
- High flow-rate systems
- 24-hour continuous operation combined heat and power (CHP) units
- Industrial cooling systems requiring reduced maintenance frequency
| Product Name | PART NUMBER | PRODUCT TYPE | Diameter (MM） | SYSTEM TYPE | HARDNESS | COLOR |
|---|---|---|---|---|---|---|
| 26-PL130-3 || 26mm Cleaning ball | 26-PL130-3 | Polishing Ball for Special Water Conditions | 26 | PL130 | 3 | Customized |
| 27-PL130-3 || 27mm Cleaning ball | 27-PL130-3 | Polishing Ball for Special Water Conditions | 27 | PL130 | 3 | Customized |
| 28-PL130-3 || 28mm Cleaning ball | 28-PL130-3 | Polishing Ball for Special Water Conditions | 28 | PL130 | 3 | Customized |
| 29-PL130-3 || 29mm Cleaning ball | 29-PL130-3 | Polishing Ball for Special Water Conditions | 29 | PL130 | 3 | Customized |
| 30-PL130-3 || 30mm Cleaning ball | 30-PL130-3 | Polishing Ball for Special Water Conditions | 30 | PL130 | 3 | Customized |
| 31-PL130-3 || 31mm Cleaning ball | 31-PL130-3 | Polishing Ball for Special Water Conditions | 31 | PL130 | 3 | Customized |
| 32-PL130-3 || 32mm Cleaning ball | 32-PL130-3 | Polishing Ball for Special Water Conditions | 32 | PL130 | 3 | Customized |
| 33-PL130-3 || 33mm Cleaning ball | 33-PL130-3 | Polishing Ball for Special Water Conditions | 33 | PL130 | 3 | Customized |
| 34-PL130-3 || 34mm Cleaning ball | 34-PL130-3 | Polishing Ball for Special Water Conditions | 34 | PL130 | 3 | Customized |
| 35-PL130-3 || 35mm Cleaning ball | 35-PL130-3 | Polishing Ball for Special Water Conditions | 35 | PL130 | 3 | Customized |
| 36-PL130-3 || 36mm Cleaning ball | 36-PL130-3 | Polishing Ball for Special Water Conditions | 36 | PL130 | 3 | Customized |
| 37-PL130-3 || 37mm Cleaning ball | 37-PL130-3 | Polishing Ball for Special Water Conditions | 37 | PL130 | 3 | Customized |