P150, PL150 Standard Cleaning Ball with Polishing Agent
Description
P150, PL150 Standard sponge cleaning balls with an external polishing agent coating are specially designed for stainless steel and titanium tubes operating in low-salinity water environments.
The added polishing agent enhances surface cleaning performance while maintaining tube protection during continuous operation.
Application
Suitable for cleaning:
- Stainless steel tubes in low-salinity water systems
- Titanium tubes in low-salinity water systems
- Heat exchangers in power plants and industrial cooling systems
Cleaning Frequency
Recommended cleaning frequency:
12 cleaning balls passing through each tube per hour.
Features
- Cleaning balls with an external polishing agent for enhanced cleaning efficiency.
- Suitable for removing soft deposits, slime, and fouling from stainless steel and titanium tubes.
- PL150 type is not recommended for already clean stainless steel or titanium tubes.
Product Physical Properties
| Model | Hardness | Wet Density | Application Characteristics |
| P130 | Soft (25° Shore C) | 1.04–1.08 g/cm³ | Standard cleaning performance |
| P150 | Medium Hard (28° Shore C) | 1.04–1.08 g/cm³ | Enhanced cleaning capability |
| P160 | Hard (32° Shore C) | 1.04–1.08 g/cm³ | Higher wear resistance |
- Aging Coefficient:≥0.70
Product Highlights – P Series Standard Type
- General-purpose standard cleaning ball widely used in power plants.
- Balanced elasticity and cleaning performance.
- High cost-effectiveness.
- Standard choice for neutral water quality conditions.
Recommended Applications
- Conventional thermal power plants
- Captive power plants
- Routine maintenance of newly installed heat exchanger units
- Systems with soft and sticky sludge deposits
Product Highlights – Enhanced Wear-Resistant P Series
Physical Properties
Same basic properties as the standard P series, with improved cross-linking technology:
- Improved material cross-linking structure
- Wear loss ≤ 12 mm after 120 hours operation
- Aging coefficient ≥ 75
Advantages
- Upgraded wear-resistant formulation of the P series.
- Reduces cleaning ball consumption by approximately 30%.
- Extends service life and reduces replacement frequency.
Recommended Applications
- High-flow-rate cooling systems
- 24-hour continuous operation combined heat and power (CHP) units
- Long-running industrial heat exchanger systems requiring reduced maintenance frequency
| Product Name | PART NUMBER | PRODUCT TYPE | Diameter (MM） | SYSTEM TYPE | HARDNESS | COLOR |
|---|---|---|---|---|---|---|
| 38-PL150-3 || 38mm Cleaning ball | 38-PL150-3 | Standard Cleaning Ball with Polishing Compound | 38 | PL150 | 3 | Customized |
| 39-PL150-3 || 39mm Cleaning ball | 39-PL150-3 | Standard Cleaning Ball with Polishing Compound | 39 | PL150 | 3 | Customized |
| 40-PL150-3 || 40mm Cleaning ball | 40-PL150-3 | Standard Cleaning Ball with Polishing Compound | 40 | PL150 | 3 | Customized |
| 41-PL150-3 || 41mm Cleaning ball | 41-PL150-3 | Standard Cleaning Ball with Polishing Compound | 41 | PL150 | 3 | Customized |
| 42-PL150-3 || 42mm Cleaning ball | 42-PL150-3 | Standard Cleaning Ball with Polishing Compound | 42 | PL150 | 3 | Customized |
| 43-PL150-3 || 43mm Cleaning ball | 43-PL150-3 | Standard Cleaning Ball with Polishing Compound | 43 | PL150 | 3 | Customized |
| 44-PL150-3 || 44mm Cleaning ball | 44-PL150-3 | Standard Cleaning Ball with Polishing Compound | 44 | PL150 | 3 | Customized |